DIY Phone Stand for Desk: Creative Ideas and Tutorials 

Are you tired of constantly picking up your phone from your desk to check for notifications or incoming calls? Or maybe you’re struggling to keep your phone at the perfect angle while video conferencing or watching a movie? A phone stand for desk can help solve these problems by providing a stable and ergonomic holder for your phone.

And the best part is, you don’t have to spend a lot of money to get one! In this article, we’ll share some DIY phone stand for desk ideas and tutorials that you can try at home using simple materials.

Materials Needed

Before we dive into the DIY phone stand for desk ideas and tutorials, let’s first go over the materials you’ll need to make them:

Household Items

• Binder clips
• Rubber bands
• Cardboard
• Clothespins

Wood Scraps

• Saw
• Sandpaper
• Wood glue

3D Printing Materials

• Free 3D modeling software
• 3D printer (can be purchased or accessed through local libraries or maker spaces)
• Filament (e.g., PLA, ABS)

Multi-Functional Components

• Wireless charger
• Mini whiteboard
• Pen holder
• Business card holder
• Headphone hanger

Simple DIY Phone Stand Ideas

Let’s start with some simple DIY phone stand for desk ideas that you can make using household items. These are perfect for those who don’t have access to power tools or 3D printers.

Binder Clip Phone Stand

• Take two large binder clips and remove their handles.
• Clip them onto each other at a 90-degree angle, with the clamps facing outwards.
• Adjust the width of the clamps to fit your phone.
• Flip the stand over and place it on your desk.
• Place your phone between the clamps, with the bottom clamp supporting the phone and the top clamp keeping it upright.

Rubber Band Phone Stand

• Take two rubber bands and tie them together to form an X-shape.
• Place the rubber band X on a flat surface.
• Place your phone on top of the rubber band X, with the bottom corners of the phone resting on the rubber bands.
• Adjust the tension of the rubber bands to keep the phone in place.

Cardboard Phone Stand

• Cut a piece of cardboard into a rectangular shape (about 4 inches wide and 6 inches tall).
• Fold the cardboard in half horizontally, with the printed side facing outwards.
• Fold the top edge of the cardboard down by 1 inch.
• Fold the bottom edge of the cardboard up by 1 inch.
• Fold the cardboard along the middle crease to create a triangular stand.
• Place your phone on the stand, with the bottom edge resting on the folded bottom edge of the cardboard.

Wooden Phone Stand Ideas

If you have some woodworking skills and tools, you can make a more sturdy and durable phone stand for desk using wood scraps. Here are some wooden phone stand ideas that you can try:

Minimalist Wooden Phone Stand

• Cut a piece of wood into a rectangular shape (about 4 inches wide and 6 inches tall).
• Sand the edges and surfaces of the wood to smooth out any roughness.
• Apply wood glue to the bottom edge of the wood and attach two wooden dowels (about 2 inches tall) to the bottom edge, about 1 inch apart from each other.
• Let the glue dry completely.
• Place your phone on the stand, with the bottom edge resting on the wooden dowels.

Rustic Wooden Phone Stand

• Cut a piece of wood into a rectangular shape (about 6 inches wide and 8 inches tall).
• Sand the edges and surfaces of the wood to smooth out any roughness.
• Apply wood glue to the bottom edge of the wood and attach two wooden blocks (about 1 inch tall) to the bottom edge, about 2 inches apart from each other.
• Let the glue dry completely.
• Use a saw to cut a slot in the top of the wood, about 1 inch deep and wide enough to fit your phone.
• Sand the inside of the slot to smooth out any roughness.
• Decorate the wood with paint or wood stain (optional).
• Place your phone in the slot, with the bottom edge resting on the wooden blocks.

3D Printed Phone Stand Ideas

If you have access to a 3D printer, you can create unique and customizable phone stand for desk designs. Here are some 3D printed phone stand ideas that you can try:

Modular Phone Stand

• Use free 3D modeling software (such as Tinkercad) to design a modular phone stand.
• The design should consist of several small pieces that can be assembled together in different configurations to create a variety of phone stand shapes.
• Print the pieces using filament of your choice (e.g., PLA, ABS).
• Assemble the pieces according to the desired configuration.
• Place your phone on the stand.

Wireless Charging Phone Stand

• Use free 3D modeling software to design a phone stand that includes a wireless charger.
• The design should have a slot to hold the phone and a built-in wireless charging pad.
• Print the design using filament of your choice.
• Place the wireless charger in the stand.
• Place your phone in the slot and connect it to the wireless charger.

Multi-Functional Phone Stand Ideas

If you want a phone stand that can do more than just hold your phone, you can try making a multi-functional phone stand. Here are some ideas:

Mini Whiteboard Phone Stand

• Use a small whiteboard (about 6 inches wide and 4 inches tall) as the base for the phone stand.
• Attach a wooden block (about 2 inches tall) to the back of the whiteboard using wood glue.
• Let the glue dry completely.
• Use a saw to cut a slot in the top of the wooden block, about 1 inch deep and wide enough to fit your phone.
• Sand the inside of the slot to smooth out any roughness.
• Place your phone in the slot.
• Use the whiteboard to jot down notes or reminders.

Pen Holder Phone Stand

• Use a wooden block (about 4 inches wide and 2 inches tall) as the base for the phone stand.
• Use a saw to cut a slot in the top of the wooden block, about 1 inch deep and wide enough to fit your phone.
• Sand the inside of the slot to smooth out any roughness.
• Attach a small wooden dowel (about 1 inch tall) to the side of the wooden block using wood glue.
• Let the glue dry completely.
• Place your phone in the slot.
• Use the wooden dowel to hold your pens or pencils.

Business Card Holder Phone Stand

• Use a wooden block (about 4 inches wide and 2 inches tall) as the base for the phone stand.
• Use a saw to cut a slot in the top of the wooden block, about 1 inch deep and wide enough to fit your phone.
• Sand the inside of the slot to smooth out any roughness.
• Attach a small wooden block (about 1 inch tall) to the front of the wooden block using wood glue.
• Let the glue dry completely.
• Place your phone in the slot.
• Use the small wooden block to hold your business cards.

Conclusion

With these DIY phone stand for desk ideas and tutorials, you can create a phone stand that meets your specific needs and preferences. Whether you prefer a simple design or a multi-functional one, there are plenty of options to choose from.

By using basic materials such as wood or 3D printing filaments, you can create a phone stand that is both affordable and personalized. With a phone stand, you can keep your phone at a comfortable viewing angle while freeing up space on your desk. Give these DIY ideas a try and see how they can improve your workspace!