installation of a water supply station to a residential building using a hydraulic accumulator. Pumping station.

Imagine you’ve just landed from work, all exhausted, craving a quick shower, only to encounter low water pressure-must be very annoying. It’s worse when you’re preparing for guests, with a kitchen sink full of utensils, and the pressure doesn’t seem to behave.

Low water pressure is a common problem in most households but shouldn’t be tolerated for any reason. Simultaneously, super-high water pressure can be annoying, followed by substantial water bills and chances of injuries to the user.

While water pressure issues are common in many homes, you shouldn’t let them be part of your life. With a few prevention mechanisms, you can win yourself perfect water pressure forever. You can also perform occasional water pressure tests on your central supply system to stay in the know.

Let’s learn the various ways to adjust the water pressure in your house.

Look Out for Leakages

Cracked pipes supplying water into your house may be the critical cause of distorted water pressure. As water travels through these pipes, the pressure is reduced due to leakages, affecting the entire house.

Whenever you note issues with your water pressure, you can check for leakages around the kitchen pipes, bathroom pipes, and other critical areas. Other signs of leakages within the compound included moist ceilings and walls.

Call the Plumber

The issue with water pressure is just a call away from being completely solved. After trying out all the techniques of adjusting water pressure to no reward, you can call an experienced plumber to work the miracles, and the water will flow smoothly in no time.

Qualified plumbers offer more efficient services since they have experience in the field. You can seek one with testimonials from previous clients before hiring them.

Replace Corroded Pipes

Corroded pipes significantly reduce the water pressure in your house. After years of sufficiently supplying water across the rooms, your water pipes are prone to corrosion from accumulated water minerals.

Sometimes it could be collected dirt materials such as leaves, mud, and other residuals that need to be cleaned up. You can start cleaning the water pipes by running a mixture of baking soda and vinegar through them to unclog the deposits.

If the above technique doesn’t work, your water pipes might be beyond repair and require a replacement with new ones. New water pipes will supply water around the house with satisfying pressure.

The Well Pump

If you have a private well pump drilled within your compound, it should be the first spot to check whenever you realize unusual water pressure in the house. Your good pump is vulnerable to blockages from accumulated dirt and clogs.

After learning about debris and clogs within your good pump, you can consider seeking professional well-cleaning services rather than doing it yourself; not being an expert exposes you to the risks of accidents and possible destruction of the system unwillingly.

If you’re using a municipal water supply, you need to check with the concerned departments on the issue of low water pressure.

Replace the Water Regulator

Do not blame your water regulator for wearing out; it has been working overtime for years to handle water pressure around the house, and it could be time to get a new one. Water pressure is significantly affected when a water regulator wears out and can be annoying if not attended to.

To adjust the tension, get a new regulator and re-install it with your preferred settings. Even better, you can get a plumber to do the job for more effective results.

Purchase a Water Pressure Booster

After analyzing all the possible causes of unusual water pressure in your home with no solution, it could be time to purchase a water pressure booster. Maybe your main water supply is located meters from the house, causing a reduction in water pressure due to the long distance covered.

That way, you will require a water pressure booster to work the magic with the water pressure around your house. These boosters are available in different sizes and strengths; you can get one depending on your needs and at an affordable price.

Check the Aerator

An aerator is usually located at the tip of water faucets, often responsible for letting air into the system to achieve a consistent stream. Faucet aerators are prone to clogging from mineral deposits and should be attended to regularly.

After realizing a distortion in water pressure around the house, checking the aerator should be one of your subsequent reasons to determine the cause. Clogged faucet aerators are easily manageable with the following tips;

  • Use a pair of pliers to detach the aerator from the faucet.
  • Soak the clogged aerator in a water mixture mixed with vinegar and baking soda for 6-8hours.
  • Brush the aerator thoroughly before rinsing it in clean water.
  • Re-install the aerator and turn the faucet on to note the changes.