Windows are a key feature of any home and that is why they need proper maintenance and timely repair. Proper maintenance and restoration of windows can enhance the look of the house. This task will need specialised tools and expertise and therefore must be left to an expert of Glass Window Repair Sydney.

What is needed for window frame repair or awning repairs?

This is a tricky job which needs experience and expertise, what you also need are specific tools and materials. Here is a list of everything that is needed to repair an old window frame.

Utilities:

  • Safety glasses
  • Gloves
  • Ear protector
  • Dust mask
  • Brush
  • Filling and packing knives
  • Paintbrush
  • Foam paint roller
  • Bucket of water

Tools:

  • Sanding band
  • Sanding Mandrel
  • Flap wheel
  • Rotary tool
  • Router Bit

Materials:

  • Dry cloth
  • Paint that is suitable for outdoor use
  • Scrap wood
  • Painting tape
  • Degreaser
  • 2-component filler

Step by step guide to Glass Window Repair Sydney

This step by step guide will help you understand how an old window frame can be restored and given a new whiff of life.

  1. Inspect the wood: Before the restoration is started, the wooden frame must be inspected for any rot. Rotting wood can compromise the structure and integrity of the frame. You must check for soft spots or spongy texture as they are a sign of wood rot.
  2. Remove wood rot and paint coat: Before you can remove the rot, you must remove the old paint. This can be done using a triangle scraper. Scrape well to remove all the paint, don’t worry about any uneven surface as this will be taken care of during sanding. Then using an awl you can remove the rot.
  3. Thorough cleaning of the rot: In order to restore a frame and do it well, it is important to completely remove the rot. Put on your goggles, gloves, ear protectors and dust mask. Use a rotary tool, starting at a low RPM. Do not apply too much pressure and use slow motions.
  4. Sanding: Now use the rotary tool at a higher RPM to sand the wood. Keep wearing the safety gear while you do this. Keep sanding until the routed holes are completely smooth and can be filled.
  5. Use a filler to patch the holes: Patching up helps restore a uniform surface. Usually a two component epoxy filler is used as it hardens well and is resistant to water. At this stage, do not worry about getting a perfect and smooth surface, as you will sand again.
  6. Sand the frame: Now prepare the frame for painting by sanding it. Make sure you have the safety gear on at this stage. The goal at this stage is to achieve a smooth surface that is ready to paint.
  7. Wipe the frame: After sanding there will be a lot of dust, use a brush to remove the dust. If you have a vacuum cleaner use that. Use a piece of cloth to clean the frame and the glass.
  8. Painting: Use a tape to protect the glass from paint and then start painting. A painting brush and roller brush can be used to paint the frame and give it a fresh and new look.